.ClaRa.Components.BoundaryConditions.PrescribedHeatFlow

Information

This model allows a specified amount of heat flow rate to be "injected" into a thermal system at a given port. The amount of heat is given by the input signal Q_flow into the model. The heat flows into the component to which the component PrescribedHeatFlow is connected, if the input signal is positive.

If parameter alpha is > 0, the heat flow is mulitplied by (1 + alpha*(port.T - T_ref)) in order to simulate temperature dependent losses (which are given an reference temperature T_ref).

For detailed model documentation please consult the html-documentation shipped with ClaRa.

Authorship and Copyright Statement for original (initial) Contribution

Author:

References:

For references please consult the html-documentation shipped with ClaRa.

Remarks:

This component was developed by ClaRa development team under the 3-clause BSD License.

ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).

CLA:

The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf

By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.

The ClaRa development team consists of the following partners:

TLK-Thermo GmbH (Braunschweig, Germany)

XRG Simulation GmbH (Hamburg, Germany).

Revisions

For revisions please consult the html-documentation shipped with ClaRa.