recordIComPump_L2

Extends from IComPump_L1.

Information

For detailed model documentation please consult the html-documentation shipped with ClaRa.

 


Authorship and Copyright Statement for original (initial) Contribution

Author:

DYNCAP/DYNSTART development team, Copyright © 2011-2024.

References:

For references please consult the html-documentation shipped with ClaRa.

Remarks:

This component was developed by ClaRa development team under the 3-clause BSD License.

Acknowledgements:

ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).

CLA:

The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf

By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.

The ClaRa development team consists of the following partners:

TLK-Thermo GmbH (Braunschweig, Germany)

XRG Simulation GmbH (Hamburg, Germany).

Parameters

TypeNameDefaultDescription
General
TILMedia.VLEFluid.Types.BaseVLEFluidmedium (from IComPump_L1)Used medium model
Nominal
Basics.Units.VolumeFlowRateV_flow_max (from IComPump_L1)Max. flow at Delta_p = 0 and rpm_nom
Basics.Units.RPMrpm_nom (from IComPump_L1)nominal rotational speed

Components

TypeNameDefaultDescription
Basics.Units.PowerP_iso (from IComPump_L1)Power for isentropic flow
Basics.Units.PressureDelta_p (from IComPump_L1)Pressure difference between pressure side and suction side
Basics.Units.VolumeFlowRateV_flow (from IComPump_L1)Volume flow
Basics.Units.RPMrpm (from IComPump_L1)Rotational speed
Basics.Units.MassFlowRatem_flow (from IComPump_L1)Mass flow
Basics.Units.PressureDelta_p_max_var (from IComPump_L1)Max. pressure difference at V_flow = 0 and rpm_nom
TILMedia.Internals.TILMediaExternalObjectfluidPointer_in (from IComPump_L1)Pointer to inlet gas object
Basics.Units.Pressurep_in (from IComPump_L1)Inlet pressure
Basics.Units.EnthalpyMassSpecifich_in (from IComPump_L1)Inlet enthalpy
Basics.Units.MassFraction[medium.nc - 1]xi_in (from IComPump_L1)Inlet medium composition
Basics.Units.EnthalpyMassSpecifich_in_iso (from IComPump_L1)Intlet isentropic enthalpy
TILMedia.Internals.TILMediaExternalObjectfluidPointer_out (from IComPump_L1)Pointer to outlet gas object
Basics.Units.Pressurep_out (from IComPump_L1)Outlet pressure
Basics.Units.EnthalpyMassSpecifich_out (from IComPump_L1)Outlet enthalpy
Basics.Units.MassFraction[medium.nc - 1]xi_out (from IComPump_L1)Outlet medium composition
Basics.Units.EnthalpyMassSpecifich_out_iso (from IComPump_L1)Outlet isentropic enthalpy
TILMedia.Internals.TILMediaExternalObjectfluidPointer_bulkPointer to bulk gas object
Basics.Units.EnthalpyMassSpecifich_bulkInlet enthalpy
Basics.Units.MassFraction[medium.nc - 1]xi_bulkInlet medium composition
Basics.Units.Massmass||Mass of system|

Revisions

For revisions please consult the html-documentation shipped with ClaRa.