modelDenitrification_L1_old
Model for a simple ammonia denitrification with fixed separation ratio
Extends from ClaRa.Basics.Icons.Separator.
Information
Model description: A simple DeNOx filter model
Contact: Andre Thüring, Lasse Nielsen, TLK-Thermo GmbH
FEATURES
- This model uses TILMedia
- Calculates the amount on NH3 necessary to achieve the given separation rate
- Stationary mass and energy balance
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fundamental Definitions | |||
| TILMedia.Gas.Types.BaseGas | medium | simCenter.flueGasModel | Medium to be used in tubes |
| Real | separationRate | 0.9995 | Separation rate |
| General › Nominal Values | |||
| ClaRa.Basics.Units.MassFlowRate | m_flow_nom | 200 | Nominal mass flow rates at inlet |
| Nominal Values | |||
| ClaRa.Basics.Units.Pressure | p_nom | 1e5 | Nominal pressure |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_nom | 1e5 | Nominal specific enthalpy |
| Initialisation | |||
| Integer | initOption | 0 | Type of initialisation |
| ClaRa.Basics.Units.Temperature | T_start | 273.15 + 100.0 | Start value of system temperature |
| ClaRa.Basics.Units.Pressure | p_start | 1.013e5 | Start value of sytsem pressure |
| ClaRa.Basics.Units.MassFraction[medium.nc - 1] | xi_start | {0.01, 0, 0.25, 0, 0.7, 0, 0, 0.04, 0} | Start value of sytsem mass fraction |
| Boolean | useHomotopy | simCenter.useHomotopy | True, if homotopy method is used during initialisation |
| Expert Settings | |||
| Boolean | allow_reverseFlow | true | True if flow reversal shall be supported |
| Boolean | use_dynamicMassbalance | true | True if a dynamic mass balance shall be applied |
| Summary and Visualisation | |||
| Boolean | showData | true | True, if a data port containing p,T,h,s,m_flow shall be shown, else false |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Interfaces.GasPortIn | inlet | ||
| ClaRa.Basics.Interfaces.GasPortOut | outlet | ||
| ClaRa.Basics.Interfaces.HeatPort_a | heat | ||
| ClaRa.Basics.Interfaces.EyeOut | eyeOut |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.SimCenter | simCenter | ||
| Fundamentals.Denitrification_controlVolume | deNOx_controlVolume | ||
| ClaRa.Basics.ControlVolumes.GasVolumes.VolumeGas_L2 | flueGasCell | ||
| Summary | summary |
Contents
| Name | Description |
|---|---|
 Outline | |
 Summary | |
 Geometry | |
 HeatTransfer | |
 PressureLoss |