modelE_Filter_L2_empirical_old

Model for an electrical dust filter based on the Deutsch-Equation for the separation rate with empirical numbers for the partical migration speed

Extends from ClaRa.Basics.Icons.E_Filter.

Information

Model description: An empirical E-filter model

Contact: Andre Thüring, Lasse Nielsen, TLK-Thermo GmbH

FEATURES

  • This model uses TILMedia
  • Calculates the separation rate according to an empirical equation
  • Power consumption is calculated with a given specific power consumption
  • Stationary mass and energy balance

Parameters

TypeNameDefaultDescription
Fundamental Definitions
TILMedia.Gas.Types.BaseGasmediumsimCenter.flueGasModelMedium to be used in tubes
Modelica.Units.SI.Velocityw_m0.15Migration speed of dust particles in the E-field
Realspecific_powerConsumption0.15Specific power consumption
General › Nominal Values
ClaRa.Basics.Units.MassFlowRatem_flow_nom10Nominal mass flow rates at inlet
Nominal Values
ClaRa.Basics.Units.Pressurep_nom1e5Nominal pressure
ClaRa.Basics.Units.EnthalpyMassSpecifich_nom1e5Nominal specific enthalpy
Geometry
ClaRa.Basics.Units.AreaA_el100Collector area of E-Filter
Initialisation
IntegerinitOption0Type of initialisation
ClaRa.Basics.Units.TemperatureT_start380Start value of system Temperature
ClaRa.Basics.Units.Pressurep_start1.013e5Start value of system pressure
ClaRa.Basics.Units.MassFraction[medium.nc - 1]xi_start{0.01, 0, 0.25, 0, 0.7, 0, 0, 0.04, 0}Start value of system mass fraction
BooleanuseHomotopysimCenter.useHomotopyTrue, if homotopy method is used during initialisation
Expert Settings
Booleanuse_dynamicMassbalancetrueTrue if a dynamic mass balance shall be applied
Summary and Visualisation
BooleancontributeToCycleSummarysimCenter.contributeToCycleSummaryTrue if component shall contribute to automatic efficiency calculation
BooleanshowDatatrueTrue if a data port containing p,T,h,s,m_flow shall be shown, else false

Connectors

TypeNameDefaultDescription
ClaRa.Basics.Interfaces.GasPortIninletInlet port
ClaRa.Basics.Interfaces.GasPortOutoutletOutlet port
ClaRa.Basics.Interfaces.HeatPort_aheat
ClaRa.Basics.Interfaces.EyeOuteyeOut

Components

TypeNameDefaultDescription
ClaRa.SimCentersimCenter
ClaRa.Basics.Interfaces.Connected2SimCenterconnected2SimCenter
RealseparationRateSeparation rate
ClaRa.Basics.Units.VolumeFlowRateV_flowVolumeflow rate of flue Gas entering the E-Filter
Realk_effinverse of specific collector surface
HeatTransferheattransfer
Geometrygeo
PressureLosspressureLoss
TILMedia.Gas.Gas_pTdust
Summarysummary

Contents

NameDescription
Outline
Summary
HeatTransfer
PressureLoss
Geometry