modelE_Filter_L2_simple_old
Simple model for an electrical dust filter
Extends from ClaRa.Basics.Icons.E_Filter.
Information
Model description: An ideal E-filter model
Contact: Andre Thüring, Lasse Nielsen, TLK-Thermo GmbH
FEATURES
- This model uses TILMedia
- Calculates the separated ash with a given separation rate
- Power consumption is calculated with a given specific power consumption
- Stationary mass and energy balance
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fundamental Definitions | |||
| TILMedia.Gas.Types.BaseGas | medium | simCenter.flueGasModel | Medium to be used in filter |
| Real | separationRate | 0.9995 | Separation rate |
| Real | specific_powerConsumption | 0.15 | Specific power consumption |
| Initialisation | |||
| Integer | initOption | 0 | Type of initialisation |
| ClaRa.Basics.Units.Temperature | T_start | 380 | Start value of system Temperature |
| ClaRa.Basics.Units.Pressure | p_start | 1.013e5 | Start value of system pressure |
| ClaRa.Basics.Units.MassFraction[medium.nc - 1] | xi_start | {0.01, 0, 0.25, 0, 0.7, 0, 0, 0.04, 0} | Start value of system mass fraction |
| Boolean | useHomotopy | simCenter.useHomotopy | True, if homotopy method is used during initialisation |
| General › Nominal Values | |||
| ClaRa.Basics.Units.MassFlowRate | m_flow_nom | 10 | Nominal mass flow rates at inlet |
| Nominal Values | |||
| ClaRa.Basics.Units.Pressure | p_nom | 1e5 | Nominal pressure |
| ClaRa.Basics.Units.Temperature | T_nom | 380 | Nominal Temperature |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_nom | 1e5 | Nominal specific enthalpy |
| Expert Settings | |||
| Boolean | use_dynamicMassbalance | true | True if a dynamic mass balance shall be applied |
| Summary and Visualisation | |||
| Boolean | contributeToCycleSummary | simCenter.contributeToCycleSummary | True if component shall contribute to automatic efficiency calculation |
| Boolean | showData | true | True if a data port containing p,T,h,s,m_flow shall be shown, else false |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Interfaces.GasPortIn | inlet | Inlet port | |
| ClaRa.Basics.Interfaces.GasPortOut | outlet | Outlet port | |
| ClaRa.Basics.Interfaces.HeatPort_a | heat | ||
| ClaRa.Basics.Interfaces.EyeOut | eyeOut |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.SimCenter | simCenter | ||
| ClaRa.Basics.Interfaces.Connected2SimCenter | connected2SimCenter | ||
| HeatTransfer | heattransfer | ||
| Geometry | geo | ||
| PressureLoss | pressureLoss | ||
| TILMedia.Gas.Gas_pT | dust | ||
| Summary | summary |
Contents
| Name | Description |
|---|---|
 Outline | |
 Summary | |
 HeatTransfer | |
 PressureLoss | |
 Geometry |