Model for a flame room section with additional secondary air inlet
inside a combustion chamber
Model description: A stationary flame room model for fuel
fired furnaces with additional air port
Contact: Lasse Nielsen, TLK-Thermo GmbH
FEATURES
- This model uses TILMedia
- Stationary mass and energy balances are used
- Additional air port for secondary air
- The formation enthalpy of the used fuel is calculated with the
given Lower heating value and and ideal combustion with the given
elemental composition of the fuel
- Lower heating can be regarded with a fixed value or calculated
according to the "Verbandsformel"
- Different heat transfer correlations can be chosen
- Capable to burn unburnt fuel from lower burner sections
- Amount of burnable fuel mass is calculated with particle
diffusity which depends on models used to determine the mean
migration speed according to the volume flow rates of the flue
gas
Generated at 2026-04-07T18:18:28Z by OpenModelicaOpenModelica 1.26.3 using
GenerateDoc.mos
.ClaRa_Obsolete.Components.Furnace.FlameRoom.FlameRoomAdditionalAir_L2_Dynamic