Model for a combustion chamber section with inner tube bundle heating surfaces
Model description: A stationary model for furnace sections with convective tube bundles inside (additional heat ports)
Contact: Lasse Nielsen, TLK-Thermo GmbH
FEATURES
- This model uses TILMedia
- Stationary mass and energy balances are used
- Tube bundles are regarded with replaceable geometry models
- Additional heat transfer ports to regard heat transfer for tube banks and carrier tubes
- The formation enthalpy of the used fuel is calculated with the given Lower heating value and and ideal combustion with the given elemental composition of the fuel
- Lower heating can be regarded with a fixed value or calculated according to the "Verbandsformel"
- Different heat transfer correlations can be chosen
- Capable to burn unburnt fuel from lower burner sections
- Amount of burnable fuel mass is calculated with particle diffusity which depends on models used to determine the mean migration speed according to the volume flow rates of the flue gas
Generated at 2026-03-16T19:13:55Z
by OpenModelicaOpenModelica 1.26.3 using GenerateDoc.mos