modelPartialFourPortVector
Partial model with four ports
Information
This model defines an interface for components with four ports each with a vectorized port at one end.
The parameters allowFlowReversal1 and
allowFlowReversal2 may be used by models that extend
this model to treat flow reversal.
This model is identical to IBPSA.Fluid.Interfaces.PartialFourPort, except for the vectorized ports at the end.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Assumptions | |||
| Boolean | allowFlowReversal1 | true | = false to simplify equations, assuming, but not enforcing, no flow reversal for medium 1 |
| Boolean | allowFlowReversal2 | true | = false to simplify equations, assuming, but not enforcing, no flow reversal for medium 2 |
| General › Ports | |||
| Integer | nPorts1 | Number of ports 1 | |
| Integer | nPorts2 | Number of ports 2 | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a1 | Fluid connector a1 (positive design flow direction is from port_a1 to port_b1) | |
| Modelica.Fluid.Interfaces.FluidPort_a | port_a2 | Fluid connector a2 (positive design flow direction is from port_a2 to port_b2) | |
| Modelica.Fluid.Interfaces.FluidPorts_b[nPorts1] | ports_b1 | Fluid connectors b1 (positive design flow direction is from port_a1 to ports_b1) | |
| Modelica.Fluid.Interfaces.FluidPorts_b[nPorts2] | ports_b2 | Fluid connectors b2 (positive design flow direction is from port_a2 to ports_b2) |
Contents
| Name | Description |
|---|---|
 Medium1 | Medium 1 in the component |
| Medium2 | Medium 2 in the component |