modelbase

Information

This example simulates a heat supply and consumer network made out of a base heating station, a substation, 14 buildings and 12 pipes. The building models "BuildingHT" and "BuildingLT" are used for this example. The heat supply needs a high supply temperature for the first group of buildings and the substation transfers the heat to a medium with lower supply temperature for the second group of buildings. Therefor there are two separated medium loops, which are connected in heat flow by the substation.

Before simulating it is recommended to type "Advanced.SparseActivate=true" into the commands to reduce computation time substantially.

Available commands:

• Simulate 1 week: Simulates the model for a duration of 1 week after using the command "Advanced.SparseActivate=true"
• Simulate 1 day: Simulates the model for a duration of 1 day after using the command "Advanced.SparseActivate=true"
• Plot heat flow of both stations: This plot compares the heat flow of the two stations.

Components

Contents

Name	Description
Medium