modelBaseSupply

Extends from IBPSA.Fluid.Interfaces.PartialTwoPortVector (Partial component with two ports, one of which being vectorized).

Parameters

Type	Name	Default	Description
General › Ports
Integer	nPorts (from PartialTwoPortVector)		Number of ports
Assumptions
Boolean	allowFlowReversal (from PartialTwoPortVector)	true	= true to allow flow reversal, false restricts to design direction (port_a -> port_b)
Nominal condition
Modelica.SIunits.MassFlowRate	m_flow_nominal	Q_flow_nominal/((TemSup_nominal - TemRet_nominal)*cp_default)	Nominal mass flow rate
Modelica.SIunits.Power	Q_flow_nominal		Nominal heat flow rate
Modelica.SIunits.Temperature	TemSup_nominal		Nominal supply temperature
Modelica.SIunits.Temperature	TemRet_nominal		Nominal return temperature
Advanced
Modelica.SIunits.MassFlowRate	m_flow_small	1E-4*abs(m_flow_nominal)	Small mass flow rate for regularization of zero flow

Type	Name	Default	Description
Modelica.Fluid.Interfaces.FluidPort_a	port_a (from PartialTwoPortVector)		Fluid connector a (positive design flow direction is from port_a to ports_b)
Modelica.Fluid.Interfaces.FluidPorts_b[nPorts]	ports_b (from PartialTwoPortVector)		Fluid connectors b (positive design flow direction is from port_a to ports_b)