modelSupply_pT

Source model with prescribed pressure difference and outlet temperature.

Extends from IBPSA.Fluid.Interfaces.PartialTwoPort (Partial component with two ports).

Information

Source model with prescribed pressure difference and outlet temperature.

Parameters

TypeNameDefaultDescription
Assumptions
BooleanallowFlowReversal (from PartialTwoPort)true= false to simplify equations, assuming, but not enforcing, no flow reversal
Advanced
Modelica.SIunits.MassFlowRateeps_m_flow1E-4Small mass flow rate for checking of mass flow balance

Connectors

TypeNameDefaultDescription
Modelica.Fluid.Interfaces.FluidPort_aport_a (from PartialTwoPort)Fluid connector a (positive design flow direction is from port_a to port_b)
Modelica.Fluid.Interfaces.FluidPort_bport_b (from PartialTwoPort)Fluid connector b (positive design flow direction is from port_a to port_b)
Modelica.Blocks.Interfaces.RealInputdelta_p_set
Modelica.Blocks.Interfaces.RealInputT_supply_set
Modelica.Blocks.Interfaces.RealOutputT_return
Modelica.Blocks.Interfaces.RealOutputm_flow
Modelica.Blocks.Interfaces.RealInputp_ref_set

Components

TypeNameDefaultDescription
IBPSA.Fluid.Sensors.TemperaturesenTem
IBPSA.Fluid.Sources.Boundary_pTsink
IBPSA.Fluid.Sources.Boundary_pTsource
Modelica.Blocks.Math.Addadd

Revisions

  • Feburary 2, 2022, by Edmund Widl:
    Implementation and added User's guide.