| Integer | NbSwitchOffSignals (from SwitchOffLogic) | | Number of switch-off signals to take into account in inputs |
| Boolean | SwitchOffSignal10 (from SwitchOffLogic) | false | Initial switch-off signal 1 |
| Boolean | SwitchOffSignal20 (from SwitchOffLogic) | false | Initial switch-off signal 2 |
| Boolean | SwitchOffSignal30 (from SwitchOffLogic) | false | Initial switch-off signal 3 |
| Boolean | Running0 (from SwitchOffLogic) | if NbSwitchOffSignals >= 3 then not (SwitchOffSignal10 or SwitchOffSignal20 or SwitchOffSignal30) elseif NbSwitchOffSignals >= 2 then not (SwitchOffSignal10 or SwitchOffSignal20) else not SwitchOffSignal10 | Indicates if the component is initially running or not |
| Automaton | Type (from SwitchOffTapChangerPhaseShifter) | | |
| Types.Time | t1st (from TapChangerPhaseShifterParams) | | Time lag before changing the first tap in s |
| Types.Time | tNext (from TapChangerPhaseShifterParams) | | Time lag before changing subsequent taps in s |
| Integer | tapMin (from TapChangerPhaseShifterParams) | | Minimum tap |
| Integer | tapMax (from TapChangerPhaseShifterParams) | | Maximum tap |
| Boolean | regulating0 (from TapChangerPhaseShifterParams) | | Whether the tap-changer/phase-shifter is initially regulating |
| Boolean | locked0 (from TapChangerPhaseShifterParams) | not regulating0 | Whether the tap-changer/phase-shifter is initially locked |
| Boolean | running0 (from TapChangerPhaseShifterParams) | true | Whether the tap-changer/phase-shifter is initially running |
| Real | valueToMonitor0 (from TapChangerPhaseShifterParams) | | Initial monitored value (unit depending on the monitored variable unit) |
| Integer | tap0 (from TapChangerPhaseShifterParams) | | Initial tap |
| State | state0 (from TapChangerPhaseShifterParams) | | Initial state |
| Real | valueMax (from BaseTapChangerPhaseShifter) | | Threshold above which the tap-changer/phase-shifter will take action (unit depending on the monitored variable unit) |
| Real | valueStop | | Value below which the phase-shifter will stop (unit depending on the monitored variable unit) |
| Integer | increasePhase | | Whether the phase shifting is increased when the tap is increased |
| Types.ActivePower | P0 | | Initial active power (unit depending on the monitored active power unit) |