modelHvdcVscDanglingP_INIT

Initialisation model for the HVDC VSC model with terminal2 connected to a switched-off bus (P control on terminal 1)
▶ Check in your browser

Extends from AdditionalIcons.Init.

Parameters

TypeNameDefaultDescription
Types.PerUnitLambdaPuLambda coefficient for the QRefUPu calculation in pu (base SNom, UNom)
BooleanModeU1SetSet mode of control on side 1 : if true, U mode, if false, Q mode
Types.ApparentPowerModuleSNomInjector nominal apparent power in MVA
Types.ActivePowerPuP10PuStart value of active power at terminal 1 in pu (base SnRef) (AC to DC)
Types.ReactivePowerPuQ10PuStart value of reactive power at terminal 1 in pu (base SnRef) (AC to DC)
Types.VoltageModulePuU10PuStart value of voltage amplitude at terminal 1 in pu (base UNom)
Types.AngleUPhase10Start value of voltage angle at terminal 1 in rad

Components

TypeNameDefaultDescription
Types.ComplexCurrentPui10PuStart value of complex current at terminal 1 in pu (base SnRef, UNom) (AC to DC)
Types.PerUnitIp10PuStart value of active current at terminal 1 in pu (base SNom, UNom) (DC to AC)
Types.PerUnitIq10PuStart value of reactive current at terminal 1 in pu (base SNom, UNom) (DC to AC)
BooleanModeU10Initial mode of control on side 1 : if true, U mode, if false, Q mode
Types.ActivePowerPuPRef0PuStart value of active power reference in pu (base SNom) (DC to AC)
Types.ReactivePowerPuQRef10PuStart value of reactive power reference at terminal 1 in pu (base SNom) (DC to AC)
Types.ComplexApparentPowerPus10PuStart value of complex apparent power at terminal 1 in pu (base SnRef) (AC to DC)
Types.ComplexVoltagePuu10PuStart value of complex voltage at terminal 1 in pu (base UNom)
Types.VoltageModulePuURef10PuStart value of the voltage reference for the side 1 of the HVDC link in pu (base UNom)