modelWT4CurrentSource_INIT
Wind Turbine Type 4 model from IEC 61400-27-1 standard : initialization model
Extends from AdditionalIcons.Init, Dynawo.Electrical.Controls.IEC.IEC61400.Parameters.QLimitParameters, Dynawo.Electrical.Controls.IEC.IEC61400.Parameters.CurrentLimitParameters.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.ApparentPowerModule | SNom | Nominal converter apparent power in MVA | |
| Types.PerUnit | BesPu | if ConverterLVControl then 0 else BLvTrPu | Shunt susceptance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.PerUnit | GesPu | if ConverterLVControl then 0 else GLvTrPu | Shunt conductance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.PerUnit | ResPu | if ConverterLVControl then 0 else RLvTrPu | Serial resistance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.PerUnit | XesPu | if ConverterLVControl then 0 else XLvTrPu | Serial reactance between converter output and WT terminal in pu (base UNom, SNom) |
| Types.CurrentModulePu | IMaxPu | Maximum current at converter terminal in pu (base UNom, SNom) | |
| Types.PerUnit | Kpqu | Partial derivative of reactive current limit against voltage in pu (base UNom, SNom) | |
| Types.VoltageModulePu | UpquMaxPu | WT voltage in the operation point where zero reactive power can be delivered, in pu (base UNom) | |
| Integer | MqG | General Q control mode (0-4): Voltage control (0), Reactive power control (1), Open loop reactive power control (2), Power factor control (3), Open loop power factor control (4) | |
| Types.PerUnit | RDropPu | Resistive component of voltage drop impedance in pu (base UNom, SNom) | |
| Types.VoltageModulePu | URef0Pu | User-defined bias in voltage reference in pu (base UNom) | |
| Types.PerUnit | XDropPu | Inductive component of voltage drop impedance in pu (base UNom, SNom) | |
| Boolean | QlConst | True if limits are constant | |
| Types.ReactivePowerPu | QMaxPu | Constant maximum reactive power at grid terminal in pu (base SNom) (generator convention) | |
| Types.ReactivePowerPu | QMinPu | Constant minimum reactive power at grid terminal in pu (base SNom) (generator convention) | |
| Types.ActivePowerPu | P0Pu | Initial active power at grid terminal in pu (base SnRef) (receptor convention) | |
| Types.ReactivePowerPu | Q0Pu | Initial reactive power at grid terminal in pu (base SnRef) (receptor convention) | |
| Types.VoltageModulePu | U0Pu | Initial voltage amplitude at grid terminal in pu (base UNom) | |
| Types.Angle | UPhase0 | Initial voltage angle at grid terminal in rad | |
| QLimitTables | |||
| Real | TableQMaxUwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMaxUwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMaxUwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMaxUwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMaxUwtcFilt31 (from QLimitParameters) | 0.8 | |
| Real | TableQMaxUwtcFilt32 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxUwtcFilt41 (from QLimitParameters) | 1.2 | |
| Real | TableQMaxUwtcFilt42 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxUwtcFilt51 (from QLimitParameters) | 1.21 | |
| Real | TableQMaxUwtcFilt52 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxUwtcFilt61 (from QLimitParameters) | 1.22 | |
| Real | TableQMaxUwtcFilt62 (from QLimitParameters) | 0.33 | |
| Real[:,:] | TableQMaxUwtcFilt (from QLimitParameters) | [TableQMaxUwtcFilt11, TableQMaxUwtcFilt12; TableQMaxUwtcFilt21, TableQMaxUwtcFilt22; TableQMaxUwtcFilt31, TableQMaxUwtcFilt32; TableQMaxUwtcFilt41, TableQMaxUwtcFilt42; TableQMaxUwtcFilt51, TableQMaxUwtcFilt52; TableQMaxUwtcFilt61, TableQMaxUwtcFilt62] | Voltage dependency of reactive power maximum limit |
| Real | TableQMinUwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMinUwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMinUwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMinUwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMinUwtcFilt31 (from QLimitParameters) | 0.8 | |
| Real | TableQMinUwtcFilt32 (from QLimitParameters) | -0.33 | |
| Real | TableQMinUwtcFilt41 (from QLimitParameters) | 1.2 | |
| Real | TableQMinUwtcFilt42 (from QLimitParameters) | -0.33 | |
| Real[:,:] | TableQMinUwtcFilt (from QLimitParameters) | [TableQMinUwtcFilt11, TableQMinUwtcFilt12; TableQMinUwtcFilt21, TableQMinUwtcFilt22; TableQMinUwtcFilt31, TableQMinUwtcFilt32; TableQMinUwtcFilt41, TableQMinUwtcFilt42] | Voltage dependency of reactive power minimum limit |
| Real | TableQMaxPwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMaxPwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMaxPwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMaxPwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMaxPwtcFilt31 (from QLimitParameters) | 0.3 | |
| Real | TableQMaxPwtcFilt32 (from QLimitParameters) | 0.33 | |
| Real | TableQMaxPwtcFilt41 (from QLimitParameters) | 1 | |
| Real | TableQMaxPwtcFilt42 (from QLimitParameters) | 0.33 | |
| Real[:,:] | TableQMaxPwtcFilt (from QLimitParameters) | [TableQMaxPwtcFilt11, TableQMaxPwtcFilt12; TableQMaxPwtcFilt21, TableQMaxPwtcFilt22; TableQMaxPwtcFilt31, TableQMaxPwtcFilt32; TableQMaxPwtcFilt41, TableQMaxPwtcFilt42] | Active power dependency of reactive power maximum limit |
| Real | TableQMinPwtcFilt11 (from QLimitParameters) | 0 | |
| Real | TableQMinPwtcFilt12 (from QLimitParameters) | 0 | |
| Real | TableQMinPwtcFilt21 (from QLimitParameters) | 0.001 | |
| Real | TableQMinPwtcFilt22 (from QLimitParameters) | 0 | |
| Real | TableQMinPwtcFilt31 (from QLimitParameters) | 0.3 | |
| Real | TableQMinPwtcFilt32 (from QLimitParameters) | -0.33 | |
| Real | TableQMinPwtcFilt41 (from QLimitParameters) | 1 | |
| Real | TableQMinPwtcFilt42 (from QLimitParameters) | -0.33 | |
| Real[:,:] | TableQMinPwtcFilt (from QLimitParameters) | [TableQMinPwtcFilt11, TableQMinPwtcFilt12; TableQMinPwtcFilt21, TableQMinPwtcFilt22; TableQMinPwtcFilt31, TableQMinPwtcFilt32; TableQMinPwtcFilt41, TableQMinPwtcFilt42] | Active power dependency of reactive power minimum limit |
| CurrentLimitTables | |||
| Real | TableIpMaxUwt11 (from CurrentLimitParameters) | 0 | |
| Real | TableIpMaxUwt12 (from CurrentLimitParameters) | 0 | |
| Real | TableIpMaxUwt21 (from CurrentLimitParameters) | 0.1 | |
| Real | TableIpMaxUwt22 (from CurrentLimitParameters) | 0 | |
| Real | TableIpMaxUwt31 (from CurrentLimitParameters) | 0.15 | |
| Real | TableIpMaxUwt32 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt41 (from CurrentLimitParameters) | 0.9 | |
| Real | TableIpMaxUwt42 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt51 (from CurrentLimitParameters) | 0.925 | |
| Real | TableIpMaxUwt52 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt61 (from CurrentLimitParameters) | 1 | |
| Real | TableIpMaxUwt62 (from CurrentLimitParameters) | 1.1 | |
| Real | TableIpMaxUwt71 (from CurrentLimitParameters) | 1.1 | |
| Real | TableIpMaxUwt72 (from CurrentLimitParameters) | 1.1 | |
| Real[:,:] | TableIpMaxUwt (from CurrentLimitParameters) | [TableIpMaxUwt11, TableIpMaxUwt12; TableIpMaxUwt21, TableIpMaxUwt22; TableIpMaxUwt31, TableIpMaxUwt32; TableIpMaxUwt41, TableIpMaxUwt42; TableIpMaxUwt51, TableIpMaxUwt52; TableIpMaxUwt61, TableIpMaxUwt62; TableIpMaxUwt71, TableIpMaxUwt72] | Voltage dependency of active current limits |
| Real | TableIqMaxUwt11 (from CurrentLimitParameters) | 0 | |
| Real | TableIqMaxUwt12 (from CurrentLimitParameters) | 0 | |
| Real | TableIqMaxUwt21 (from CurrentLimitParameters) | 0.1 | |
| Real | TableIqMaxUwt22 (from CurrentLimitParameters) | 0 | |
| Real | TableIqMaxUwt31 (from CurrentLimitParameters) | 0.15 | |
| Real | TableIqMaxUwt32 (from CurrentLimitParameters) | 1 | |
| Real | TableIqMaxUwt41 (from CurrentLimitParameters) | 0.9 | |
| Real | TableIqMaxUwt42 (from CurrentLimitParameters) | 1 | |
| Real | TableIqMaxUwt51 (from CurrentLimitParameters) | 0.925 | |
| Real | TableIqMaxUwt52 (from CurrentLimitParameters) | 0.33 | |
| Real | TableIqMaxUwt61 (from CurrentLimitParameters) | 1.075 | |
| Real | TableIqMaxUwt62 (from CurrentLimitParameters) | 0.33 | |
| Real | TableIqMaxUwt71 (from CurrentLimitParameters) | 1.1 | |
| Real | TableIqMaxUwt72 (from CurrentLimitParameters) | 1 | |
| Real | TableIqMaxUwt81 (from CurrentLimitParameters) | 1.1001 | |
| Real | TableIqMaxUwt82 (from CurrentLimitParameters) | 1 | |
| Real[:,:] | TableIqMaxUwt (from CurrentLimitParameters) | [TableIqMaxUwt11, TableIqMaxUwt12; TableIqMaxUwt21, TableIqMaxUwt22; TableIqMaxUwt31, TableIqMaxUwt32; TableIqMaxUwt41, TableIqMaxUwt42; TableIqMaxUwt51, TableIqMaxUwt52; TableIqMaxUwt61, TableIqMaxUwt62; TableIqMaxUwt71, TableIqMaxUwt72; TableIqMaxUwt81, TableIqMaxUwt82] | Voltage dependency of reactive current limits |
| LV transformer | |||
| Types.PerUnit | BLvTrPu | Shunt susceptance of LV transformer in pu (base UNom, SNom) | |
| Types.PerUnit | GLvTrPu | Shunt conductance of LV transformer in pu (base UNom, SNom) | |
| Types.PerUnit | RLvTrPu | Serial resistance of LV transformer in pu (base UNom, SNom) | |
| Types.PerUnit | XLvTrPu | Serial reactance of LV transformer in pu (base UNom, SNom) | |
| Boolean | ConverterLVControl | If true, the converter is controlling at its output (LV side of its transformer), if false, after its transformer (MV side) | |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Types.ComplexCurrentPu | iGs0Pu | Complex current at converter output in pu (base SNom) (generator convention) | |
| Types.PerUnit | Ip0Pu | Initial active current component at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Types.PerUnit | IpMax0Pu | Initial maximum active current at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Types.PerUnit | Iq0Pu | Initial reactive current component at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Types.PerUnit | IqMax0Pu | Initial maximum reactive current at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Types.PerUnit | IqMin0Pu | Initial minimum reactive current at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Types.VoltageModulePu | UWt0DroppedPu | Initial voltage magnitude controlled by the WT in pu (base UNom) | |
| Types.ReactivePowerPu | QMax0Pu | Initial maximum reactive power at grid terminal in pu (base SNom) | |
| Types.ReactivePowerPu | QMin0Pu | Initial minimum reactive power at grid terminal in pu (base SNom) | |
| Types.PerUnit | XWT0Pu | Initial reactive power or voltage reference at grid terminal in pu (base SNom or UNom) (generator convention) | |
| Types.ComplexVoltagePu | u0Pu | Initial complex voltage at grid terminal in pu (base UNom) | |
| Types.ComplexCurrentPu | i0Pu | Initial complex current at grid terminal in pu (base UNom, SnRef) (receptor convention) | |
| Dynawo.NonElectrical.Blocks.NonLinear.Min2 | min3Init | ||
| Modelica.Blocks.Tables.CombiTable1Ds | combiTable1Ds2Init | ||
| Dynawo.NonElectrical.Blocks.NonLinear.Max2 | max0Init | ||
| Modelica.Blocks.Tables.CombiTable1Ds | combiTable1Ds1Init | ||
| Modelica.Blocks.Tables.CombiTable1Ds | combiTable1DsInit | ||
| Modelica.Blocks.Tables.CombiTable1Ds | combiTable1Ds3Init | ||
| Modelica.Blocks.Sources.Constant | const1Init | ||
| Modelica.Blocks.Sources.Constant | const2Init | ||
| Modelica.Blocks.Tables.CombiTable1Ds | combiTable1Ds4Init | ||
| Modelica.Blocks.Math.Product | productInit | ||
| Dynawo.NonElectrical.Blocks.Continuous.SqrtNoEvent | sqrtNoEventInit | ||
| Dynawo.NonElectrical.Blocks.NonLinear.Max2 | max1Init | ||
| Modelica.Blocks.Math.Feedback | feedbackInit | ||
| Modelica.Blocks.Math.Product | product2Init | ||
| Dynawo.NonElectrical.Blocks.NonLinear.Min2 | min1Init | ||
| Modelica.Blocks.Sources.Constant | constant1Init | ||
| Dynawo.NonElectrical.Blocks.NonLinear.Min2 | min2Init | ||
| Modelica.Blocks.Sources.Constant | constInit | ||
| Modelica.Blocks.Sources.Constant | const3Init | ||
| Modelica.Blocks.Math.Gain | gainInit | ||
| Dynawo.NonElectrical.Blocks.NonLinear.Max2 | max3Init | ||
| Modelica.Blocks.Math.Gain | gain1Init | ||
| Modelica.Blocks.Sources.Constant | const4Init | ||
| Modelica.Blocks.Sources.Constant | constant2Init | ||
| Modelica.Blocks.Tables.CombiTable1Ds | combiTable1Ds5Init | ||
| Modelica.Blocks.Sources.Constant | const5Init | ||
| Modelica.Blocks.Math.Add | addInit |