modelMotorVoltageSensor
Sensor to measure the voltage between two pins
Extends from Modelica.Icons.RotationalSensor.
Information
The voltage sensor converts the voltage between the two connectors into a real valued signal. It does not influence the current sum at the nodes in between the voltage is measured, therefore, the electrical behavior is not influenced by the sensor.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | u_link_actual | Voltage between pin p and n (= p.v - n.v) as output signal | |
| SI.Voltage | u_d | ||
| SI.Voltage | u_q | ||
| Interfaces.PositivePin | p | ||
| Interfaces.NegativePin | n | ||
| Modelica.Blocks.Interfaces.RealOutput | u_link_max | Connector of Real output signal | |
| Modelica.Blocks.Interfaces.RealOutput | u_q_out | Connector of Real output signal | |
| Modelica.Blocks.Interfaces.RealOutput | u_d_out | Voltage between pin p and n (= p.v - n.v) as output signal | |
| HelpBlocks.Max | max |
Revisions
- 1998
by Christoph Clauss
initially implemented