blockvoltageLimit
Limit the range of a voltage signal with variable limits
Extends from Modelica.Blocks.Interfaces.SISO (Single Input Single Output continuous control block).
Information
The Limiter block passes its input signal as output signal as long as the input is within the upper and lower limits specified by the two additional inputs limit1 and limit2. If this is not the case, the corresponding limit is passed as output.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | strict | false | = true, if strict limits with noEvent(..) |
| Boolean | limitsAtInit | true | = false, if limits are ignored during initialization (i.e., y=u) |
| Limiting data | |||
| SI.Voltage | U_eff_max | Voltage limit of motor module | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealInput | u (from SISO) | Connector of Real input signal | |
| RealOutput | y (from SISO) | Connector of Real output signal | |
| Modelica.Blocks.Interfaces.RealInput | u_d | Connector of Real input signal used as maximum of input u |