modelSMEE_VCurve2
V curves of electrical excited synchronous machine operated as generator at Pmech = -SNominal*1/3
Extends from HanserModelica.SynchronousMachines.SMEE_VCurve1 (V curves of electrical excited synchronous machine operated as generator at Pmech = 0).
Information
Compare the simulation results of this simulation model with results calculated by SMEE_VCurve1.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | m (from SMEE_VCurve1) | 3 | Number of stator phases |
| Integer | p (from SMEE_VCurve1) | 2 | Number of poles |
| Modelica.Units.SI.Voltage | VsNominal (from SMEE_VCurve1) | 100 | Nominal RMS voltage per phase |
| Modelica.Units.SI.Frequency | fsNominal (from SMEE_VCurve1) | smeeData.fsNominal | Nominal frequency |
| Modelica.Units.SI.AngularVelocity | wNominal (from SMEE_VCurve1) | 2*pi*fsNominal/p | Nominal speed |
| Modelica.Units.SI.Current | IeMax (from SMEE_VCurve1) | 31 | Maximum excitation current |
| Modelica.Units.SI.Current | Ie0 (from SMEE_VCurve1) | 10 | No load excitation current |
| Modelica.Units.SI.Torque | tauMax (from SMEE_VCurve1) | smeeData.SNominal/wNominal | Maximum torque at power factor = 1 |
| Modelica.Units.SI.Angle | gamma0 (from SMEE_VCurve1) | 0 | Initial rotor displacement angle |
| Boolean | positiveRange (from SMEE_VCurve1) | false | Use positive range of angles, if true |
| ParameterRecords.SMEE1 | smeeData (from SMEE_VCurve1) | Synchronous machine data |