.IBPSA.Fluid.FMI

Information

This package contains blocks that serve as containers for exporting models from IBPSA.Fluid as a Functional Mockup Unit (FMU).

This allows using models from IBPSA.Fluid, add them to a block that only has input and output signals, but no acausal connectors, and then export the model as a Functional Mockup Unit. Models can be individual models or systems that are composed of various models. For more information, see the User's Guide.

Contents

NameDescription
UsersGuideUser's Guide
FlowSplitter_uModel of a flow splitter that can be exported as an FMU
Sink_TModel of a sink with temperature for reverse flow as an input that can be exported as an FMU
Source_TModel of a boundary with mass flow rate, pressure and temperature as an input that can be exported as an FMU
AdaptorsPackage with adaptors to connect models with fluid ports and models with signal ports
ConversionPackage with blocks that convert between different connectors
ExportContainersPackage with containers to export thermofluid flow models
ValidationCollection of validation models
InterfacesPackage with interfaces for models that serves as an FMU container
BaseClassesPackage with base classes for IBPSA.Fluid.FMI

Generated at 2024-03-27T19:15:56Z by OpenModelicaOpenModelica 1.22.3 using GenerateDoc.mos