.IBPSA.Fluid.Storage.Examples.StratifiedEnhancedInternalHex

Information

This model provides an example for the IBPSA.Fluid.Storage.StratifiedEnhancedInternalHex model. There are three tanks. In the tank on top, the fluid in the heat exchanger and the metal of the heat exchanger use a steady-state energy balance. In the middle tank, both use a dynamic balance. In the bottom tank, the fluid uses a steady-state heat balance but the metal of the heat exchanger uses a dynamic balance.

Each tank starts at the same water temperature, and there is no water flow through the tank. The glycol that flows through the heat exchanger starts with zero mass flow rate, and is set to its design flow rate at t=300 seconds.

Contents

NameDescription
 MediumTanMedium in the tank
 MediumHexMedium in the heat exchanger

Revisions


Generated at 2024-12-23T19:25:42Z by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos