Building component interfaces
| Name | Description |
|---|---|
| BoundaryType | Type of zone boundary conditions that should be considered |
| DummyConnection | Source generator/sink for propsbus |
| PartialOpaqueSurface | Partial component for the opaque surfaces of the building envelope |
| PartialSurface | Partial model for building envelope component |
| PartialZone | Building zone model |
| RealConnector | Real connector without input/output specifier |
| BooleanConnector | Boolean connector without input/output specifier |
| RectangularZoneTemplateInterface | Rectangular zone including walls, floor and ceiling |
| SolBus | Bus containing solar radiation for various incidence angles as well as external convection coefficients |
| WeaBus | Data bus that stores weather data |
| WindowBus | Bus containing inputs/outputs for linear window model |
| WindowDynamicsType | Type of dynamics that are used for window models |
| ZoneBus | |
| ZoneBusVarMultiplicator | Component to scale all flows from the zone propsBus. This can be used to scale the surface to n identical surfaces |
| ZoneInterface | Partial model for thermal building zones |
| VolumePort | Port for summing zone volumes |
| AreaPort | Port for summing wall surface areas |
| SetVolume | Block for setting volume of the zone |
| SetArea | Block for communicating the surface area of the surface to the SimInfoManager |