modelVentilationMPC
PPD12 model using off-line computed model predictive controller results
Extends from BaseClasses.VentilationNoControl (Ppd 12 example model).
Information
This model uses the weather file Uccle.TMY since it was used when the reference results were generated.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | n50 (from Structure) | 1.1 | n50 value cfr airtightness, i.e. the ACH at a pressure diffence of 50 Pa |
| Modelica.Units.SI.Length | hFloor0 (from Structure) | 2.9 | Height of ground floor |
| Modelica.Units.SI.Length | hFloor1 (from Structure) | 2.7 | Height of first floor |
| Modelica.Units.SI.Length | hFloor2 (from Structure) | 2.5 | Height of second floor |
| Modelica.Units.SI.Length | lHallway (from Structure) | 8 | Length of hallway |
| Modelica.Units.SI.Length | wHallwayAvg (from Structure) | (wHallway1 + wHallway2)/2 | Hallway width |
| Modelica.Units.SI.Length | wHallway1 (from Structure) | 1.1 | Hallway width |
| Modelica.Units.SI.Length | wHallway2 (from Structure) | 1.4 | Hallway width |
| Modelica.Units.SI.Length | wZon (from Structure) | (wZonStr + wBathroom)/2 | Avg living width |
| Modelica.Units.SI.Length | wZonStr (from Structure) | 3.2 | Living width at street |
| Modelica.Units.SI.Length | wBuilding (from Structure) | 4.6 | |
| Modelica.Units.SI.Length | wBathroom (from Structure) | 2.85 | |
| Modelica.Units.SI.Length | lDiner (from Structure) | 3 | |
| Modelica.Units.SI.Length | wBedroom (from Structure) | 4.4 | |
| Modelica.Units.SI.Length | wDiner (from Structure) | 4.5 | |
| Modelica.Units.SI.Length | lPorch (from Structure) | 2 | |
| Modelica.Units.SI.Length | wPorch (from Structure) | wBuilding - wKitchen | |
| Modelica.Units.SI.Length | wKitchen (from Structure) | 1.4 | |
| Modelica.Units.SI.Length | lHalfBuilding (from Structure) | 3.75 | |
| Modelica.Units.SI.Length | lBuilding (from Structure) | 8 | |
| Modelica.Units.NonSI.Angle_deg | angDelta (from Structure) | 23.6 | |
| Modelica.Units.SI.Angle | north (from Structure) | IDEAS.Types.Azimuth.N + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | south (from Structure) | IDEAS.Types.Azimuth.S + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | west (from Structure) | IDEAS.Types.Azimuth.W + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | east (from Structure) | IDEAS.Types.Azimuth.E + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Real | dp_26mm (from HeatingNoControl) | 992*(m_flow_nominal/0.4)^2 | Pressure drop per m of duct with diameter of 26/20 mm for flow rate of 0.4kg/s |
| Real | dp_20mm (from HeatingNoControl) | 2871*(m_flow_nominal/0.4)^2 | Pressure drop per m of duct with diameter of 20/16 mm for flow rate of 0.4kg/s |
| Real | dp_16mm (from HeatingNoControl) | 11320*(m_flow_nominal/0.4)^2 | Pressure drop per m of duct with diameter of 16/12 mm for flow rate of 0.4kg/s |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal (from HeatingNoControl) | 0.4 | Nominal water mass flow rate |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal_air (from HeatingNoControl) | 300*1.2/3600 | Nominal air mass flow rate |
| Modelica.Units.SI.Temperature | TSet (from HeatingNoControl) | 294.15 | Temperature set point |
| Modelica.Units.SI.Temperature | TSet2 (from HeatingNoControl) | 303.15 | Temperature set point |
Components
Revisions
-
April 19, 2021 by Filip Jorissen:
Updated weather file