modelVentilationRBC
Ppd 12 example model using rule based controller
Extends from IDEAS.Examples.PPD12.BaseClasses.VentilationNoControl (Ppd 12 example model).
Information
Example model of a partially renovated terraced house in Belgium. This model adds the building ventilation system.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | n50 (from Structure) | 1.1 | n50 value cfr airtightness, i.e. the ACH at a pressure diffence of 50 Pa |
| Modelica.Units.SI.Length | hFloor0 (from Structure) | 2.9 | Height of ground floor |
| Modelica.Units.SI.Length | hFloor1 (from Structure) | 2.7 | Height of first floor |
| Modelica.Units.SI.Length | hFloor2 (from Structure) | 2.5 | Height of second floor |
| Modelica.Units.SI.Length | lHallway (from Structure) | 8 | Length of hallway |
| Modelica.Units.SI.Length | wHallwayAvg (from Structure) | (wHallway1 + wHallway2)/2 | Hallway width |
| Modelica.Units.SI.Length | wHallway1 (from Structure) | 1.1 | Hallway width |
| Modelica.Units.SI.Length | wHallway2 (from Structure) | 1.4 | Hallway width |
| Modelica.Units.SI.Length | wZon (from Structure) | (wZonStr + wBathroom)/2 | Avg living width |
| Modelica.Units.SI.Length | wZonStr (from Structure) | 3.2 | Living width at street |
| Modelica.Units.SI.Length | wBuilding (from Structure) | 4.6 | |
| Modelica.Units.SI.Length | wBathroom (from Structure) | 2.85 | |
| Modelica.Units.SI.Length | lDiner (from Structure) | 3 | |
| Modelica.Units.SI.Length | wBedroom (from Structure) | 4.4 | |
| Modelica.Units.SI.Length | wDiner (from Structure) | 4.5 | |
| Modelica.Units.SI.Length | lPorch (from Structure) | 2 | |
| Modelica.Units.SI.Length | wPorch (from Structure) | wBuilding - wKitchen | |
| Modelica.Units.SI.Length | wKitchen (from Structure) | 1.4 | |
| Modelica.Units.SI.Length | lHalfBuilding (from Structure) | 3.75 | |
| Modelica.Units.SI.Length | lBuilding (from Structure) | 8 | |
| Modelica.Units.NonSI.Angle_deg | angDelta (from Structure) | 23.6 | |
| Modelica.Units.SI.Angle | north (from Structure) | IDEAS.Types.Azimuth.N + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | south (from Structure) | IDEAS.Types.Azimuth.S + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | west (from Structure) | IDEAS.Types.Azimuth.W + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Modelica.Units.SI.Angle | east (from Structure) | IDEAS.Types.Azimuth.E + Modelica.Units.Conversions.from_deg(angDelta) | Azimuth of the wall, i.e. 0deg denotes South |
| Real | dp_26mm (from HeatingNoControl) | 992*(m_flow_nominal/0.4)^2 | Pressure drop per m of duct with diameter of 26/20 mm for flow rate of 0.4kg/s |
| Real | dp_20mm (from HeatingNoControl) | 2871*(m_flow_nominal/0.4)^2 | Pressure drop per m of duct with diameter of 20/16 mm for flow rate of 0.4kg/s |
| Real | dp_16mm (from HeatingNoControl) | 11320*(m_flow_nominal/0.4)^2 | Pressure drop per m of duct with diameter of 16/12 mm for flow rate of 0.4kg/s |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal (from HeatingNoControl) | 0.4 | Nominal water mass flow rate |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal_air (from HeatingNoControl) | 300*1.2/3600 | Nominal air mass flow rate |
| Modelica.Units.SI.Temperature | TSet (from HeatingNoControl) | 294.15 | Temperature set point |
| Modelica.Units.SI.Temperature | TSet2 (from HeatingNoControl) | 303.15 | Temperature set point |
Components
Revisions
-
October 26, 2018, by Filip Jorissen:
Refactored using partials for #942. -
January 9, 2017 by Filip Jorissen:
First implementation.