.IDEAS.Fluid.Actuators.BaseClasses.PartialThreeWayValve

Information

Partial model of a three way valve. This is the base model for valves with different opening characteristics, such as linear, equal percentage or quick opening. The three way valve model consists of a mixer where valves are placed in two of the flow legs. The third flow leg has no friction. The flow coefficient Kv for flow from port_1 → port_2 is a parameter. The flow coefficient for the bypass flow from port_3 → port_2 is computed as

         Kv(port_3 → port_2)
  fraK = ----------------------
         Kv(port_1 → port_2)

where 0 < fraK ≤ 1 is a parameter with a default value of fraK=0.7.

Since this model uses two way valves to construct a three way valve, see IDEAS.Fluid.Actuators.BaseClasses.PartialTwoWayValve for details regarding the valve implementation.

Revisions

• April 14, 2020, by Michael Wetter:
  Changed homotopyInitialization to a constant.
  This is for IDEAS, #1341.
• November 5, 2019, by Michael Wetter:
  Moved assignment of leakage from IDEAS.Fluid.Actuators.BaseClasses.PartialThreeWayValve to the parent classes.
  This is for #1227.
• October 25, 2019, by Jianjun Hu:
  Improved icon graphics annotation. This is for #1225.
• March 24, 2017, by Michael Wetter:
  Renamed filteredInput to use_inputFilter.
  This is for #665.
• January 22, 2016, by Michael Wetter:
  Corrected type declaration of pressure difference. This is for #404.
• December 17, 2015, by Michael Wetter:
  Removed assignment redeclare final package Medium=Medium as this is now done in the base class. This is for https://github.com/lbl-srg/modelica-buildings/issues/475.
• November 23, 2015 by Filip Jorissen:
  Corrected valve leakage value to avoid warnings.
• February 28, 2013, by Michael Wetter:
  Reformulated assignment of parameters. Removed default value for dpValve_nominal, as this parameter has the attribute fixed=false for some values of CvData. In this case, assigning a value is not allowed. Corrected wrong documentation of parameter fraK(min=0, max=1) = 0.7. The documenation was Fraction Kv(port_1→port_2)/Kv(port_3→port_2) instead of Fraction Kv(port_3→port_2)/Kv(port_1→port_2). Because the parameter set correctly its attributes min=0 and max=1, instances of this model used the correct value.
• April 12, 2012 by Michael Wetter:
  Removed duplicate declaration of m_flow_nominal.
• February 20, 2012 by Michael Wetter:
  Renamed parameter dp_nominal to dpValve_nominal, and added new parameter dpFixed_nominal=0. See IDEAS.Fluid.Actuators.UsersGuide.
• March 25, 2011, by Michael Wetter:
  Added homotopy method.
• June 3, 2008 by Michael Wetter:
  First implementation.