.IDEAS.Fluid.HeatPumps.ModularReversible.BaseClasses.PartialReversibleRefrigerantMachine

Information

This partial model defines all components which are equally required for heat pump and chillers. This encompasses

• the heat exchangers (evaporator and condenser),
• sensors for temperature and mass flow rates,
• the replaceable model for refrigerant inertia,
• safety controls,
• connectors and parameters,
• and the replaceable refrigerant cycle model refCyc

The model refCyc is replaced in the ModularReversible model for heat pumps and chillers, e.g. by IDEAS.Fluid.HeatPumps.ModularReversible.BaseClasses.RefrigerantCycle in IDEAS.Fluid.HeatPumps.ModularReversible.Modular.

For more information on the approach, please read the UsersGuide.

Contents

Revisions

• February 27, 2025 by Jianjun Hu:
  Corrected conditions for removing COP and EER output connector.
  This is for IBPSA #1979.
• February 25, 2025 by Antoine Gautier:
  Removed hysteresis.
  This is for IBPSA #1977.
• August 19, 2024 by Michael Wetter:
  Changed markup commands for code merge.
  This is for IBPSA #1919.
• July 15, 2024 by Fabian Wuellhorst:
  Adjust hysteresis bandwidth (see issue IBPSA #1908)
• May 2, 2024, by Michael Wetter:
  Refactored check for device identifiers.
  This is for IBPSA, #1576.
• October 2, 2022 by Fabian Wuellhorst:
  Adjusted based on the discussion in this issue #1576)
• May 22, 2019 by Julian Matthes:
  Rebuild due to the introducion of the thermal machine partial model (see issue #715)
• November 26, 2018 by Fabian Wuellhorst:
  First implementation (see issue #577)