Model that tests the reverse flow for a humidifier
This model tests whether the results for a humidifer are identical
for forward flow and reverse flow.
Contents
- September 20, 2020, by Michael Wetter:
Updated model to use one port temperature sensor from Modelica
Standard Library.
This is for #1399.
- May 2, 2019, by Jianjun Hu:
Replaced fluid source. This is for #1072.
- April 12, 2017, by Michael Wetter:
Removed temperature connection that is no longer needed.
This is for issue Buildings
#704.
- November 2, 2016, by Michael Wetter:
Changed assertions to blocks that compute the difference, and added
the difference to the regression results.
This is for issue
564.
- October 9, 2013, by Michael Wetter:
Replaced Modelica.Fluid.Sources.FixedBoundary with
IDEAS.Fluid.Sources.FixedBoundary as otherwise, the
pedantic model check fails in Dymola 2014 FD01 beta3.
- July 5, 2013, by Michael Wetter:
Changed one instance of
Modelica.Fluid.Sources.MassFlowSource_T, that was
connected to the two fluid streams, to two instances, each having
half the mass flow rate. This is required for the model to work
with Modelica 3.2.1 due to the change introduced in ticket #739.
- August 19, 2010, by Michael Wetter:
First implementation based on a model from Giuliano
Fontanella.
Generated at 2026-04-07T18:18:28Z by OpenModelicaOpenModelica 1.26.3 using
GenerateDoc.mos