modelBalancedTap
DHW consumption with profile reader. RealInput mDHW60C is not used.
Extends from IDEAS.Fluid.Taps.Interfaces.BalancedTap (partial DHW model).
Information
Description
Model of a domestic hot water (DHW) system composed mainly of a thermostatic mixing valve and a table for reading the DHW flow rate.
This model is an extension of the Partial_DHW model, see there for the documentation.
Examples
An example of this model is given in IDEAS.Thermal.Components.Examples.StorageTank_DHW_HP.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Temperature | TDHWSet (from BalancedTap) | 273.15 + 45 | DHW temperature setpoint |
| Modelica.Units.SI.Temperature | TCold (from BalancedTap) | 273.15 + 10 | Nominal cold water temperature |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal (from BalancedTap) | 1 | Nominal mass flow rate |
| Modelica.Units.SI.Time | tau (from BalancedTap) | 30 | Tin time constant of temperature sensor at nominal flow rate |
| Modelica.Units.SI.Volume | VDayAvg | Average daily water consumption | |
| Integer | profileType | 1 | Type of the DHW tap profile |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_hot (from BalancedTap) | ||
| Modelica.Fluid.Interfaces.FluidPort_b | port_cold (from BalancedTap) |
Components
Revisions
-
June 5, 2018 by Filip Jorissen:
Cleaned up implementation for #821.