blockLimiterBlock
Limit the range of a signal with bessel filter
Extends from Modelica.Blocks.Interfaces.SISO (Single Input Single Output continuous control block).
Information
<!DOCTYPE html><html>
<p>The Limiter block passes its input signal as output signal as long as the input is within the specified upper and lower limits. If this is not the case, the corresponding limits are passed as output. Furthermore, the output of the variable limiter is filtered with the help of a bessel filter (low pass).</p>
</html>
Parameters
| Type | Name | Default | Description |
|---|
| Real | uMax | 1 | Upper limits of input signals |
| Real | uMin | Modelica.Constants.eps | Lower limits of input signals |
| Modelica.SIunits.Frequency | f | 100000 | |
