The example CauerLowPassSC is a low-pass-filter of the fifth order. It is realized using an switched-capacitor network with operational amplifiers. The voltage source V is the input voltage (step), and the OP5.out.v is the filter output voltage. The pulse response is calculated.
This model is identical to the CauerLowPassAnalog example, but inverting. To get the same response as that of the CauerLowPassAnalog example, a negative voltage step is used as input.
This model is identical to the CauerLowPassOPV example. But the resistors are realized by switched capacitors (see SwitchedCapacitor). There are two different types of instances, one with a value of R=1 and one with a value of R=-1.
The simulation end time should be 60. Please plot both V.v (which is the inverted input voltage) and OP5.out.v (output voltage). Compare this result with the CauerLowPassAnalog result.
Due to the recharging of the capacitances after switching the performance of simulation is not as good as in the CauerLowPassOPV example.