This package contains examples that demonstrate the usage of the components of the Electrical.Analog library.
The examples are simple to understand. They will show a typical behavior of the components, and they will give hints to users.
| Name | Description | 
|---|---|
| Cauer low pass filter with analog components | |
| Cauer low pass filter with operational amplifiers | |
| Cauer low-pass filter with operational amplifiers and switched capacitors | |
| Characteristic of ideal diodes | |
| Characteristic of ideal thyristors | |
| Chua's circuit, ns, V, A | |
| Simple NPN transistor amplifier circuit | |
| Heating MOS Inverter | |
| Heating NPN NOR Gate | |
| Heating PNP NOR Gate | |
| Resistor with simple thermal network | |
| Heating rectifier | |
| CMOS NAND Gate (see Tietze/Schenk, page 157) | |
| Example for Zener diodes | |
| B6 diode bridge | |
| Simple demo to show behaviour of SaturatingInductor component | |
| Simple demo of a VariableResistor model | |
| Comparison of switch models both with and without arc | |
| Thyristor demonstration example | |
| Simple Amplifier circuit which uses OpAmpDetailed | |
| Transformer circuit to show the magnetization facilities | |
| Comparison of controlled switch models both with and without arc | |
| Simple triac test circuit | |
| Ideal triac test circuit | |
| Conversion circuit | |
| Example to demonstrate variants to generate FMUs (Functional Mock-up Units) | |
| Resonance circuits: example to demonstrate generation of FMUs (Functional Mock-up Units) | |
| Inverting amplifier | |
| Series resonance circuit | |
| Parallel resonance circuit | |
| Demonstrate trajectory of lightning current | |
| Demonstrate behaviour of DC Power Supply | |
| Demonstrate how to avoid back current to the DC Power Supply | |
| Examples of line models | |
| Examples with operational amplifiers | |
| Utility components used by package Examples |