.Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses.TankWith3InletOutletArraysWithEvaporatorCondensor

Information

This tank has the same geometric variables as TankWith3InletOutletArrays plus the feature of a HeatPort and the possibility of evaporation. (Assumption: The gas is condensed immediately afterwards so that a liquid boiling fluid is created.)

The tank can be initialized with the following options:

• GuessValues: no explicit initial conditions
• InitialValues: initial values of temperature (or specific enthalpy), composition and level are specified
• SteadyStateHydraulic: initial values of temperature (or specific enthalpy) and composition are specified; the initial level is determined so that levels and pressure are at steady state.

Full steady state initialization is not supported, because the corresponding initial equations for temperature/enthalpy are undetermined (the flow rate through the port at steady state is zero).

Contents

Name	Description
Medium	Medium in the component
HeatTransfer	Wall heat transfer