.Modelica.Fluid.Examples.HeatExchanger.BaseClasses.BasicHX

Information

Simple model of a heat exchanger consisting of two pipes and one wall in between. For both fluids geometry parameters, such as heat transfer area and cross section as well as heat transfer and pressure drop correlations may be chosen. The flow scheme may be concurrent or counterflow, defined by the respective flow directions of the fluids entering the component. The design flow direction with positive m_flow variables is counterflow.

Contents

NameDescription
 Medium_1Fluid 1
 Medium_2Fluid 2
 HeatTransfer_1Heat transfer model
 HeatTransfer_2Heat transfer model
 FlowModel_1Characteristic of wall friction
 FlowModel_2Characteristic of wall friction

Generated at 2024-12-24T19:25:53Z by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos