.Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Utilities.PathPlanning6

Information

Given

this component computes the fastest movement under the given constraints. This means, that:

  1. Every axis accelerates with the maximum acceleration until the maximum speed is reached.
  2. Drives with the maximum speed as long as possible.
  3. Decelerates with the negative of the maximum acceleration until rest.

The acceleration, constant velocity and deceleration phase are determined in such a way that the movement starts form the start angles and ends at the end angles. The output of this block are the computed angles, angular velocities and angular acceleration and this information is stored as reference motion on the controlBus of the r3 robot.


Generated at 2024-11-23T19:25:52Z by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos