.Modelica.Mechanics.MultiBody.Frames.TransformationMatrices.planarRotation

Information

Syntax

T = TransformationMatrices.planarRotation(e, angle);

Description

This function returns transformation matrix T that describes the orientation to rotate in the plane along unit axis e from frame 1 into frame 2 with angle angle. Note, "e" must be a unit vector. However, this is not checked in this function and the function will return a wrong result, if length(e) is not one.

See also

planarRotationAngle, Frames.planarRotation, Quaternions.planarRotation.

Interface

function planarRotation
  import Modelica.Math;
  extends Modelica.Icons.Function;
  input Real e[3](each final unit = "1") "Normalized axis of rotation (must have length=1)";
  input SI.Angle angle "Rotation angle to rotate frame 1 into frame 2 along axis e";
  output TransformationMatrices.Orientation T "Orientation object to rotate frame 1 into frame 2";
end planarRotation;

Generated at 2024-11-23T19:25:52Z by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos