.Modelica.Mechanics.MultiBody.Parts.Mounting1D

Information

This component is used to acquire support torques from a 1-dim.-rotational mechanical system (e.g., components from Modelica.Mechanics.Rotational) and to propagate them to a carrier body.

The 1-dim. support torque at flange_b is transformed into 3-dim. space under consideration of the rotation axis, parameter n, which has to be given in the local coordinate system of frame_a.

All components of a 1-dim.-rotational mechanical system that are connected to a common Mounting1D element need to have the same axis of rotation along parameter vector n. This means that, e.g., bevel gears where the axis of rotation of flange_a and flange_b are different cannot be described properly by connecting to the Mounting1D component. In this case, a combination of several Mounting1D components or the component BevelGear1D should be used.

Reference
Schweiger, Christian ; Otter, Martin: Modelling 3D Mechanical Effects of 1-dim. Powertrains. In: Proceedings of the 3rd International Modelica Conference. Linköping : The Modelica Association and Linköping University, November 3-4, 2003, pp. 149-158


Generated at 2024-11-07T19:25:29Z by OpenModelicaOpenModelica 1.24.0 using GenerateDoc.mos