.Modelica.Thermal.FluidHeatFlow.Examples

Examples that demonstrate the usage of the FluidHeatFlow components

Information

This package contains test examples:

  1. SimpleCooling: Heat is dissipated through a media flow
  2. ParallelCooling: Two heat sources dissipate through merged media flows
  3. IndirectCooling: Heat is dissipated through two cooling cycles
  4. PumpAndValve: Demonstrate the usage of an IdealPump and a Valve
  5. PumpDropOut: Demonstrate shutdown and restart of a pump
  6. ParallelPumpDropOut: Demonstrate the shutdown and restart of a pump in a parallel circuit
  7. OneMass: Cooling of a mass (thermal capacity) by a coolant flow
  8. TwoMass: Cooling of two masses (thermal capacities) by two parallel coolant flows
  9. WaterPump: Water pumping station
  10. TestOpenTank: Test the OpenTank model
  11. TwoTanks: Two connected open tanks
  12. TestCylinder: Test the Cylinder model

Contents

NameDescription
SimpleCoolingSimple cooling circuit
ParallelCoolingCooling circuit with parallel branches
IndirectCoolingIndirect cooling circuit
PumpAndValveCooling circuit with pump and valve
PumpDropOutCooling circuit with drop out of pump
ParallelPumpDropOutCooling circuit with parallel branches and drop out of pump
OneMassCooling of one hot mass
TwoMassCooling of two hot masses
WaterPumpWater pumping station
TestOpenTankTest the OpenTank model
TwoTanksTwo connected open tanks
TestCylinderTwo cylinder system
UtilitiesUtility models for examples
Generated at 2025-11-29T19:14:07Z by OpenModelicaOpenModelica 1.25.7 using GenerateDoc.mos