Lapack documentation (April 2012):
Purpose:
========
DGESVX uses the LU factorization to compute the solution to a real
system of linear equations
A * X = B,
where A is an N-by-N matrix and X and B are N-by-NRHS matrices.
Error bounds on the solution and a condition estimate are also
provided.
Description:
============
The following steps are performed:
1. If FACT = 'E', real scaling factors are computed to equilibrate
the system:
TRANS = 'N': diag(R)*A*diag(C) *inv(diag(C))*X = diag(R)*B
TRANS = 'T': (diag(R)*A*diag(C))**T *inv(diag(R))*X = diag(C)*B
TRANS = 'C': (diag(R)*A*diag(C))**H *inv(diag(R))*X = diag(C)*B
Whether or not the system will be equilibrated depends on the
scaling of the matrix A, but if equilibration is used, A is
overwritten by diag(R)*A*diag(C) and B by diag(R)*B (if TRANS='N')
or diag(C)*B (if TRANS = 'T' or 'C').
2. If FACT = 'N' or 'E', the LU decomposition is used to factor the
matrix A (after equilibration if FACT = 'E') as
A = P * L * U,
where P is a permutation matrix, L is a unit lower triangular
matrix, and U is upper triangular.
3. If some U(i,i)=0, so that U is exactly singular, then the routine
returns with INFO = i. Otherwise, the factored form of A is used
to estimate the condition number of the matrix A. If the
reciprocal of the condition number is less than machine precision,
INFO = N+1 is returned as a warning, but the routine still goes on
to solve for X and compute error bounds as described below.
4. The system of equations is solved for X using the factored form
of A.
5. Iterative refinement is applied to improve the computed solution
matrix and calculate error bounds and backward error estimates
for it.
6. If equilibration was used, the matrix X is premultiplied by
diag(C) (if TRANS = 'N') or diag(R) (if TRANS = 'T' or 'C') so
that it solves the original system before equilibration.
Arguments:
==========
FACT (input) CHARACTER*1
Specifies whether or not the factored form of the matrix A is
supplied on entry, and if not, whether the matrix A should be
equilibrated before it is factored.
= 'F': On entry, AF and IPIV contain the factored form of A.
If EQUED is not 'N', the matrix A has been
equilibrated with scaling factors given by R and C.
A, AF, and IPIV are not modified.
= 'N': The matrix A will be copied to AF and factored.
= 'E': The matrix A will be equilibrated if necessary, then
copied to AF and factored.
TRANS (input) CHARACTER*1
Specifies the form of the system of equations:
= 'N': A * X = B (No transpose)
= 'T': A**T * X = B (Transpose)
= 'C': A**H * X = B (Transpose)
N (input) INTEGER
The number of linear equations, i.e., the order of the
matrix A. N >= 0.
NRHS (input) INTEGER
The number of right hand sides, i.e., the number of columns
of the matrices B and X. NRHS >= 0.
A (input, output) DOUBLE PRECISION array, dimension (LDA,N)
On entry, the N-by-N matrix A. If FACT = 'F' and EQUED is
not 'N', then A must have been equilibrated by the scaling
factors in R and/or C. A is not modified if FACT = 'F' or
'N', or if FACT = 'E' and EQUED = 'N' on exit.
On exit, if EQUED .ne. 'N', A is scaled as follows:
EQUED = 'R': A := diag(R) * A
EQUED = 'C': A := A * diag(C)
EQUED = 'B': A := diag(R) * A * diag(C).
LDA (input) INTEGER
The leading dimension of the array A. LDA >= max(1,N).
AF (input, output) DOUBLE PRECISION array, dimension (LDAF,N)
If FACT = 'F', then AF is an input argument and on entry
contains the factors L and U from the factorization
A = P*L*U as computed by DGETRF. If EQUED .ne. 'N', then
AF is the factored form of the equilibrated matrix A.
If FACT = 'N', then AF is an output argument and on exit
returns the factors L and U from the factorization A = P*L*U
of the original matrix A.
If FACT = 'E', then AF is an output argument and on exit
returns the factors L and U from the factorization A = P*L*U
of the equilibrated matrix A (see the description of A for
the form of the equilibrated matrix).
LDAF (input) INTEGER
The leading dimension of the array AF. LDAF >= max(1,N).
IPIV (input, output) INTEGER array, dimension (N)
If FACT = 'F', then IPIV is an input argument and on entry
contains the pivot indices from the factorization A = P*L*U
as computed by DGETRF; row i of the matrix was interchanged
with row IPIV(i).
If FACT = 'N', then IPIV is an output argument and on exit
contains the pivot indices from the factorization A = P*L*U
of the original matrix A.
If FACT = 'E', then IPIV is an output argument and on exit
contains the pivot indices from the factorization A = P*L*U
of the equilibrated matrix A.
EQUED (input, output) CHARACTER*1
Specifies the form of equilibration that was done.
= 'N': No equilibration (always true if FACT = 'N').
= 'R': Row equilibration, i.e., A has been premultiplied by
diag(R).
= 'C': Column equilibration, i.e., A has been postmultiplied
by diag(C).
= 'B': Both row and column equilibration, i.e., A has been
replaced by diag(R) * A * diag(C).
EQUED is an input argument if FACT = 'F'; otherwise, it is an
output argument.
R (input, output) DOUBLE PRECISION array, dimension (N)
The row scale factors for A. If EQUED = 'R' or 'B', A is
multiplied on the left by diag(R); if EQUED = 'N' or 'C', R
is not accessed. R is an input argument if FACT = 'F';
otherwise, R is an output argument. If FACT = 'F' and
EQUED = 'R' or 'B', each element of R must be positive.
C (input, output) DOUBLE PRECISION array, dimension (N)
The column scale factors for A. If EQUED = 'C' or 'B', A is
multiplied on the right by diag(C); if EQUED = 'N' or 'R', C
is not accessed. C is an input argument if FACT = 'F';
otherwise, C is an output argument. If FACT = 'F' and
EQUED = 'C' or 'B', each element of C must be positive.
B (input, output) DOUBLE PRECISION array, dimension (LDB,NRHS)
On entry, the N-by-NRHS right hand side matrix B.
On exit,
if EQUED = 'N', B is not modified;
if TRANS = 'N' and EQUED = 'R' or 'B', B is overwritten by
diag(R)*B;
if TRANS = 'T' or 'C' and EQUED = 'C' or 'B', B is
overwritten by diag(C)*B.
LDB (input) INTEGER
The leading dimension of the array B. LDB >= max(1,N).
X (output) DOUBLE PRECISION array, dimension (LDX,NRHS)
If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X
to the original system of equations. Note that A and B are
modified on exit if EQUED .ne. 'N', and the solution to the
equilibrated system is inv(diag(C))*X if TRANS = 'N' and
EQUED = 'C' or 'B', or inv(diag(R))*X if TRANS = 'T' or 'C'
and EQUED = 'R' or 'B'.
LDX (input) INTEGER
The leading dimension of the array X. LDX >= max(1,N).
RCOND (output) DOUBLE PRECISION
The estimate of the reciprocal condition number of the matrix
A after equilibration (if done). If RCOND is less than the
machine precision (in particular, if RCOND = 0), the matrix
is singular to working precision. This condition is
indicated by a return code of INFO > 0.
FERR (output) DOUBLE PRECISION array, dimension (NRHS)
The estimated forward error bound for each solution vector
X(j) (the j-th column of the solution matrix X).
If XTRUE is the true solution corresponding to X(j), FERR(j)
is an estimated upper bound for the magnitude of the largest
element in (X(j) - XTRUE) divided by the magnitude of the
largest element in X(j). The estimate is as reliable as
the estimate for RCOND, and is almost always a slight
overestimate of the true error.
BERR (output) DOUBLE PRECISION array, dimension (NRHS)
The componentwise relative backward error of each solution
vector X(j) (i.e., the smallest relative change in
any element of A or B that makes X(j) an exact solution).
WORK (output) DOUBLE PRECISION array, dimension (4*N)
On exit, WORK(1) contains the reciprocal pivot growth
factor norm(A)/norm(U). The "max absolute element" norm is
used. If WORK(1) is much less than 1, then the stability
of the LU factorization of the (equilibrated) matrix A
could be poor. This also means that the solution X, condition
estimator RCOND, and forward error bound FERR could be
unreliable. If factorization fails with 0<INFO<=N, then
WORK(1) contains the reciprocal pivot growth factor for the
leading INFO columns of A.
IWORK (output) INTEGER array, dimension (N)
INFO (output) INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value
> 0: if INFO = i, and i is
<= N: U(i,i) is exactly zero. The factorization has
been completed, but the factor U is exactly
singular, so the solution and error bounds
could not be computed. RCOND = 0 is returned.
= N+1: U is nonsingular, but RCOND is less than machine
precision, meaning that the matrix is singular
to working precision. Nevertheless, the
solution and error bounds are computed because
there are a number of situations where the
computed solution can be more accurate than the
value of RCOND would suggest.
=====================================================================
function dgesvx
extends Modelica.Icons.Function;
input Real A[:, size(A, 1)] "Matrix A[n,n]";
input Real B[size(A, 1), :] "Matrix B[n,nrhs]";
input Boolean transposed = true "True, if matrix A is transformed on input, i.e. system is A**T * X = B";
output Real X[size(A, 1), size(B, 2)] "Matrix X[n,nrhs]";
output Integer info "Info: =0: successful exit, otherwise see documentation";
output Real rcond "Estimate of the reciprocal condition number of the matrix A after equilibration";
end dgesvx;
Generated at 2024-05-18T18:16:21Z
by OpenModelicaOpenModelica 1.22.4 using GenerateDoc.mos