.Modelica_LinearSystems2.WorkInProgress.Tests.Filters.plotFilter3

Interface

function plotFilter3
  import ZP = Modelica_LinearSystems2.ZerosAndPoles;
  import Modelica_LinearSystems2.Utilities.Types;
  input Modelica.Units.SI.Frequency f_cut = 3 "Cut-off frequency";
  input Real A_ripple(unit = "dB") = 0.5 "Pass band ripple for Chebyshev filter (otherwise not used)";
  input Modelica.Units.SI.Frequency f_min = 2 "Band of pass band filter is f_min (-3db) .. f_cut (-3db)";
  input Boolean normalized = true "True, if amplitude at f_cut decreases/increases 3 db (for low/high pass filter), otherwise unmodified filter";
end plotFilter3;