.OpenHydraulics.Basic

Information

Overview

The OpenHydraulics/Basic package includes models of basic physical phenomena relevant to the hydraulics domain. These basic models are used in the components package to model actual hydraulic components.

Licensing

The OpenHydraulics/Basic package is licensed by Georgia Institute of Technology under the Modelica License 2.

Copyright © 2008-2013, Georgia Insitute of Technology

This Modelica package is free software and the use is completely at your own risk; it can be redistributed and/or modified under the terms of the Modelica License 2. For license conditions (including the disclaimer of warranty) see Hydraulics.UsersGuide.ModelicaLicense2 or visit http://www.modelica.org/licenses/ModelicaLicense2.

Contents

Name Description
 GenericPressureLoss
 LaminarRestriction
 SharpEdgedOrifice Sudden expansion in flow diameter from port_a to port_b
 SuddenExpansion Sudden expansion in flow diameter from port_a to port_b
 VariableFlow Controllable flow (independent of pressure)
 VariableLaminarRestriction
 VariableRestriction Flow loss due to controllable restriction
 VariableRestrictionSeriesValve Flow loss due to controllable restriction with series check valves
 WallFriction
 FluidPower2MechTrans
 FluidPower2MechRotConst Ideal constant displacement pump with mechanical connector for the shaft
 FluidPower2MechRotVar Ideal variable displacement pump with mechanical connector for the shaft
 AirChamber
 ConstPressureSource Boundary pressure and temperature source
 ConstVolumeSource Boundary pressure source
 VarPressureSource Boundary pressure and temperature source
 VarVolumeSource Boundary volume flow and temperature source
 OpenTank Boundary pressure, temperature and mass fraction source
 VolumeClosed A constant compressible volume
 VolumeOpen An open constant-pressure volume
 BaseClasses Base classes for flow models

Generated at 2019-07-17T01:39:38Z by OpenModelicaOpenModelica 1.14.0~dev-26604-gbda57e7 using GenerateDoc.mos