modelAccelerationLimiter
GE General GGOV1 and GGOV1DU Governor Acceleration Control
Information
The following documentation is adapted from [PSSE-Models], chapter 7.12:
This is an acceleration control system for the general purpose Turbine/Governor models GGOV1 and GGOV1DU.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.PerUnit | Ka | 10 | Acceleration limiter gain |
| Types.Time | Ta | 0.1 | Acceleration limiter time constant |
| Types.Time | DELT | 0.005 | Time step used in simulation |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | SPEED | Machine speed deviation from nominal (pu) | |
| Modelica.Blocks.Interfaces.RealInput | ASET | Acceleration limiter setpoint (p.u./s) | |
| Modelica.Blocks.Interfaces.RealOutput | FSRA | Acceleration Controller Output | |
| Modelica.Blocks.Interfaces.RealInput | FSR |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Math.Gain | acceleration | ||
| Modelica.Blocks.Math.Add | add | ||
| Modelica.Blocks.Continuous.Derivative | s8 | ||
| Modelica.Blocks.Math.Add | add1 |
Revisions
Reference |
PSS®E Models |
Last update |
2020-11-22 |
Author |
|
Contact |