modelIEESGO
IEESGO - IEEE Standard Model for Turbine-Governor
Extends from Icons.VerifiedModel (Icon for classes that were verified), BaseClasses.BaseGovernor (Base turbine governor model).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.Time | T_1 | 0.2 | Controller lag |
| Types.Time | T_2 | 0 | Controller lead compensation |
| Types.Time | T_3 | 0.5 | Governor lag |
| Types.Time | T_4 | 0.12 | Delay due to steam inlet volumes associated with steam chest and inlet piping |
| Types.Time | T_5 | 5 | Reheater delay including hot and cold leads |
| Types.Time | T_6 | 0.5 | Delay due to IP-LP turbine, crossover pipes, and LP end hoods |
| Real | K_1 | 20 | Regulation gain [1/pu] |
| Types.PerUnit | K_2 | 0.59 | Intermediate pressure turbine fraction |
| Types.PerUnit | K_3 | 0.43 | Low pressure turbine fraction |
| Types.PerUnit | P_MAX | 0.98 | Upper power limit |
| Types.PerUnit | P_MIN | 0 | Lower power limit |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | SPEED (from BaseGovernor) | ||
| Modelica.Blocks.Interfaces.RealInput | PMECH0 (from BaseGovernor) | ||
| Modelica.Blocks.Interfaces.RealOutput | PMECH (from BaseGovernor) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| OpenIPSL.NonElectrical.Continuous.SimpleLag | imSimpleLag | ||
| OpenIPSL.NonElectrical.Continuous.LeadLag | imLeadLag | ||
| OpenIPSL.NonElectrical.Continuous.SimpleLag | imSimpleLag1 | ||
| OpenIPSL.NonElectrical.Continuous.SimpleLag | imSimpleLag2 | ||
| OpenIPSL.NonElectrical.Continuous.SimpleLag | imSimpleLag3 | ||
| Modelica.Blocks.Math.Add | add | ||
| Modelica.Blocks.Nonlinear.Limiter | limiter | ||
| Modelica.Blocks.Math.Gain | gain | ||
| Modelica.Blocks.Math.Gain | gain1 | ||
| Modelica.Blocks.Math.Add3 | add3_1 |
Revisions
Reference |
PSS®E Manual |
Last update |
2020-09 |
Author |
ALSETLab, Rensselaer Polytechnic Institute |
Contact |