modelGroupBus1

69kV/615MVA generation unit connected to bus 1
Diagram of GroupBus1Open the diagram
▶ Check in your browser

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Information

69kV/615MVA Generation unit connected to bus 1, and composed of the following component models:

  • Machine: 5th order type 2, from PSAT.
  • Exciter: type II, from PSAT.

Parameters

TypeNameDefaultDescription
Realvf01.122656195484139Initial field voltage
Realvref01.065622531687790Reference voltage AVR
Power flow data
Types.ApparentPowerS_b (from pfComponent)SysData.S_bSystem base power
Types.VoltageV_b (from pfComponent)400e3Base voltage of the bus
Types.Frequencyfn (from pfComponent)SysData.fnSystem frequency
Types.ActivePowerP_0 (from pfComponent)1e6Initial active power
Types.ReactivePowerQ_0 (from pfComponent)0Initial reactive power
Types.PerUnitv_0 (from pfComponent)1Initial voltage magnitude
Types.Angleangle_0 (from pfComponent)0Initial voltage angle
BooleandisplayPF (from pfComponent)falseDisplay power flow:
Parameter mask
BooleanenableS_b (from pfComponent)falseEnable S_b in parameter list
BooleanenableV_b (from pfComponent)falseEnable V_b in parameter list
Booleanenablefn (from pfComponent)falseEnable fn in parameter list
BooleanenableP_0 (from pfComponent)falseEnable P_0 in parameter list
BooleanenableQ_0 (from pfComponent)falseEnable Q_0 in parameter list
Booleanenablev_0 (from pfComponent)falseEnable v_0 in parameter list
Booleanenableangle_0 (from pfComponent)falseEnable angle_0 in parameter list
BooleanenabledisplayPF (from pfComponent)falseEnable displayPF in parameter list

Connectors

TypeNameDefaultDescription
OpenIPSL.Interfaces.PwPinpwPin

Components

TypeNameDefaultDescription
OpenIPSL.Electrical.SystemBaseSysData (from pfComponent)Must add this line in all models
OpenIPSL.Electrical.Controls.PSAT.AVR.AVRTypeIIAVR1
OpenIPSL.Electrical.Machines.PSAT.Order5_Type2Syn1