modelRESYNCH_UNIT
Resynchronization control system
Information
This resynchronization system uses the voltage magnitude, angle and frequency controls to eliminate the differences between the mentioned variables from two different electrical nodes in order to allow the resynchronization of an islanded system.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | SPEED | ||
| Modelica.Blocks.Interfaces.RealInput | PMECH0 | ||
| Modelica.Blocks.Interfaces.RealOutput | P_CTRL | ||
| Modelica.Blocks.Interfaces.RealInput | fi_DN | ||
| Modelica.Blocks.Interfaces.RealInput | fi_IB | ||
| Modelica.Blocks.Interfaces.RealInput | V_IB | ||
| Modelica.Blocks.Interfaces.RealInput | V_DN | ||
| Modelica.Blocks.Interfaces.RealOutput | V_CTRL | ||
| Modelica.Blocks.Interfaces.BooleanOutput | TRIGGER |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Controls.FREQ_CTRL | freq_ctrl | ||
| Controls.ANGLE_CTRL | angle_ctrl | ||
| Controls.VOLT_CTRL | volt_ctrl | ||
| Modelica.Blocks.Math.Add | add | ||
| Modelica.Blocks.Math.Add | add2 | ||
| Modelica.Blocks.Math.Add | add3 | ||
| ACT_UNIT | aCT_UNIT | ||
| Modelica.Blocks.Math.Add | add1 |