modelG1

Generation unit connected to bus BG1
Diagram of G1Open the diagram
▶ Check in your browser

Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).

Information

24kV/100MVA generation unit connected to bus BG1, and composed of the following component models:

  • Machine: GENSAL, a salient pole synchronous machine from PSSE.
  • Exciter: SEXS, a simplified excitation system from PSSE.
  • Turbine/Governor: HYGOV, a hydro-turbine governor from PSSE.

Parameters

TypeNameDefaultDescription
Power flow data
Types.ApparentPowerS_b (from pfComponent)SysData.S_bSystem base power
Types.VoltageV_b (from pfComponent)400e3Base voltage of the bus
Types.Frequencyfn (from pfComponent)SysData.fnSystem frequency
Types.ActivePowerP_0 (from pfComponent)1e6Initial active power
Types.ReactivePowerQ_0 (from pfComponent)0Initial reactive power
Types.PerUnitv_0 (from pfComponent)1Initial voltage magnitude
Types.Angleangle_0 (from pfComponent)0Initial voltage angle
BooleandisplayPF (from pfComponent)falseDisplay power flow:
Parameter mask
BooleanenableS_b (from pfComponent)falseEnable S_b in parameter list
BooleanenableV_b (from pfComponent)falseEnable V_b in parameter list
Booleanenablefn (from pfComponent)falseEnable fn in parameter list
BooleanenableP_0 (from pfComponent)falseEnable P_0 in parameter list
BooleanenableQ_0 (from pfComponent)falseEnable Q_0 in parameter list
Booleanenablev_0 (from pfComponent)falseEnable v_0 in parameter list
Booleanenableangle_0 (from pfComponent)falseEnable angle_0 in parameter list
BooleanenabledisplayPF (from pfComponent)falseEnable displayPF in parameter list

Connectors

TypeNameDefaultDescription
OpenIPSL.Interfaces.PwPinconn

Components

TypeNameDefaultDescription
OpenIPSL.Electrical.SystemBaseSysData
OpenIPSL.Electrical.Machines.PSSE.GENSALgen
OpenIPSL.Electrical.Controls.PSSE.ES.SEXSsEXS
OpenIPSL.Electrical.Controls.PSSE.TG.HYGOVhYGOV
Modelica.Blocks.Sources.Constantnon_active_inputs