modelRampTrackingFilter
Extends from Modelica.Blocks.Interfaces.SISO (Single Input Single Output continuous control block).
Information
This block is used by the PSS2A and PSS2B models under OpenIPSL.Electrical.Controls.PSSE.PSS. This implementation has been done starting from the block diagram descriptions from [PSSE-MODELS].
However, as noted in [Laera2022], in order to validate the implementation against PSS/E v.33's simulation output, further analysis of the actual model response in PSS/E revealed necessary changes that deviate from the block diagrams in [PSS-MODELS]. Consequently, the implementation herein should not be expected to comply with any other "generic" implementation or block diagram description, but to that implemented in PSS/E v.33.
For more information please refer to [Laera2022].
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | T_1 | ||
| Real | T_2 | ||
| Integer | M | 5 | >=0, M*N<=8 |
| Integer | N | 1 | >=0, M*N<=8 |
| Real | y_start | 0 | Output start value |
| Boolean | bypass | if M == 0 or N == 0 then true else false | Boolean parameter |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealInput | u (from SISO) | Connector of Real input signal | |
| RealOutput | y (from SISO) | Connector of Real output signal |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Continuous.TransferFunction[M] | TF1 | Conditional component | |
| Continuous.TransferFunction[N] | TF2 | Conditional component |
Revisions
Reference |
PSS®E Manual |
Last update |
2020-04-23 |
Author |
|
Contact |