blockPowerRamp
Generate ramp signal based on logarithmic range
Extends from Modelica.Blocks.Interfaces.SO (Single Output continuous control block).
Information
The Real output y of this block is determined by a ramp output from which
y = ref * 10 ^ ramp output
is set as output of the block. This way, various decades of signal range can be generated.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | height | 1 | Height of ramp |
| Modelica.Units.SI.Time | duration | Duration of ramp (= 0.0 gives a Step) | |
| Real | offset | 0 | Offset of output signal |
| Modelica.Units.SI.Time | startTime | 0 | Output = offset for time < startTime |
| Real | ref | 1 | Reference value, determined by ref * 10 ^ (ramp function) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealOutput | y (from SO) | Connector of Real output signal |