modelmyPartialLoad
Partial model for loads
Extends from Icons.myLoad (Icon for load node), Icons.myOnePortAC (Completing one port AC icon).
Information
This model is a common basis for constant and variable loads.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.myVoltage | UNom | Reference voltage of the load | |
| Types.myPerUnit | lowVoltage | if UNom <= 1000 then 0.9 else 0.95 | Lower percentage limit for acceptable voltage |
| Types.myPerUnit | highVoltage | if UNom <= 1000 then 1.1 else 1.05 | Higher percentage limit for acceptable voltage |
| Types.myVoltage | minU | lowVoltage*UNom | Minimum acceptable value for U |
| Types.myVoltage | maxU | highVoltage*UNom | Maximum acceptable value for U |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.myAcausalTerminal | terminal | Terminal of the node |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Types.myCurrent | I | CM.abs(terminal.i) | Current flowing the load |
| Types.myVoltage | U | sqrt(3)*CM.abs(terminal.v) | Voltage at the load |
| Types.myApparentPower | S | sqrt(3)*I*U | Apparent power flowing the load |