modelImpedBaseHeat
One terminal impedance base with heat port, 1-phase
Extends from ImpedBase (One terminal impedance base, 1-phase), Interfaces.AddHeat (Additional heat port).
Information
Same as ImpedBase, but contains an additional heat port.
Does not contain mass and specific heat. These parameters are expected to belong to the corresponding thermal model. The heat-flow at the connector is given by the total dissipated electric power.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Parameter Scaling | |||
| Boolean | puUnits (from Nominal) | true | = true, if scaled with nom. values (pu), else scaled with 1 (SI) |
| Nominal | |||
| SI.Voltage | V_nom (from Nominal) | 1 | nominal Voltage (= base for pu) |
| SI.ApparentPower | S_nom (from Nominal) | 1 | nominal Power (= base for pu) |
| SI.Frequency | f_nom (from NominalAC) | system.f_nom | nominal frequency |
| Initialization | |||
| Types.Dynamics | dynType (from ImpedBase) | system.dynType | transient or steady-state initialization |
| PS.Voltage | v_start (from ImpedBase) | 0 | start value of voltage drop |
| PS.Current | i_start (from ImpedBase) | 0 | start value of current |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Ports.TwoPin_p | term (from Port_p) | positive terminal | |
| Thermal_p | heat (from AddHeat) | heat port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| PS.Voltage | v (from ImpedBase) | ||
| PS.Current | i (from ImpedBase) | ||
| SI.Temperature | T (from AddHeat) | Temperature of conductor | |
| SI.HeatFlowRate | Q_flow (from AddHeat) | Dissipated heat of conductor |