modelImpedNonSymHeat
Impedance base non symmetric with heat port, 3-phase dq0
Extends from ImpedNonSymBase (Impedance base non symmetric, 3-phase dq0.), PowerSystems.Interfaces.AddHeatV (Additional vector heat port).
Information
Same as ImpedNonSymBase, but contains an additional vector heat port.
Does not contain mass and specific heat. These parameters are expected to belong to the corresponding thermal model. The heat-flow at the connectors is given by the dissipated electric power per conductor.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | m_heat (from AddHeatV) | 1 | number of heat conductors |
| Parameter Scaling | |||
| Boolean | puUnits (from Nominal) | true | = true, if scaled with nom. values (pu), else scaled with 1 (SI) |
| Nominal | |||
| SI.Voltage | V_nom (from Nominal) | 1 | nominal Voltage (= base for pu) |
| SI.ApparentPower | S_nom (from Nominal) | 1 | nominal Power (= base for pu) |
| SI.Frequency | f_nom (from NominalAC) | system.f_nom | nominal frequency |
| Initialization | |||
| Types.Dynamics | dynType (from ImpedBase) | system.dynType | transient or steady-state model |
| PS.Voltage | v_start (from ImpedBase) | zeros(PS.n) | start value of voltage drop |
| PS.Current | i_start (from ImpedBase) | zeros(PS.n) | start value of current |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Ports.ACdq0_p | term_p (from Port_p_n) | positive terminal | |
| Ports.ACdq0_n | term_n (from Port_p_n) | negative terminal | |
| ThermalV_p | heat (from AddHeatV) | vector heat port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| PS.Voltage | v (from ImpedBase) | ||
| PS.Current | i (from ImpedBase) | ||
| SI.Temperature | T (from AddHeatV) | Temperature of heat conductors | |
| SI.HeatFlowRate | Q_flow (from AddHeatV) | Dissipated heat of conductors | |
| PS.Voltage | v_abc | Park*v | |
| PS.Current | i_abc | Park*i |