blockFlowerTrayectory
Generate the trayectory of a flower from parametric equations
Extends from Modelica.Blocks.Interfaces.MO (Multiple Output continuous control block), Servomechanisms.Utilities.IconXY.
Information
General
This blocks generates the x and y coordinates of a flower trayectory with the quadrifolium parametric equation.
Implementation
It inherits the real interfaces from the block for multiple outputs Modelica.Blocks.Interfaces.MO .
The parametric equations implemented are:
a: height, b:2pi/T, T:period, xc and yc : x and y coordinates of the center, t0: start time.
Notes
- The output is an array y where y[1] is the x coordinate and y[2] is the y coordinate. To connect the output to other component the user must input the index of the array (1 or 2).
- The user can change the radius, center, start time and period to complete the trayectory by changing the parameters of the block.
Example
With the default parameters the plot results will be:
and with plot parametric:
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nout (from MO) | 1 | Number of outputs |
| SI.Distance | a | 0.75 | height of figure |
| SI.Distance | xc | 0 | x coordinate of center of figure |
| SI.Distance | yc | 0 | y coordinate of center of figure |
| SI.Time | period | 1 | period |
| SI.Time | startTime | 0 | start time |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealOutput[nout] | y (from MO) | Connector of Real output signals |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Real | b | 2*Const.pi/period | factor |