classTorqueAnalysis
Torque Analysis element
Extends from Servomechanisms.Utilities.IconName, Modelica.Icons.RoundSensor (Icon representing a round measurement device), Modelica.Mechanics.Rotational.Interfaces.PartialTwoFlanges (Partial model for a component with two rotational 1-dim. shaft flanges).
Information
General
This element is used to measure angle, speed, acceleration, torque and RMS torque between two mechanical rotational components.
Implementation
It uses several sensor form MSL to measure the variables between two mechanical rotational ports.Notes
- The user must input the period to calculate the RMS torque value which is displayed since the second cycle.
- All the parameters are in SI units.
Example
RRTorqueAnalysisParameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Time | period | Rootmeansquare Base period |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Flange_a | flange_a (from PartialTwoFlanges) | Flange of left shaft | |
| Flange_b | flange_b (from PartialTwoFlanges) | Flange of right shaft |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Mechanics.Rotational.Sensors.AngleSensor | anglesensor1 | ||
| Modelica.Mechanics.Rotational.Sensors.SpeedSensor | speedsensor1 | ||
| Modelica.Mechanics.Rotational.Sensors.AccSensor | accsensor1 | ||
| Modelica.Mechanics.Rotational.Sensors.TorqueSensor | torquesensor1 | ||
| Modelica.Blocks.Math.RootMeanSquare | rootmeansquare1 |